Rosslare AC-215 Guía de usuario descargar pdf (Pagina 79)

How to Set Up a Site

AxTraxNG™ Software Installation and User Manual 79

8. Enter the operators’ password in the

Password

field and re-enter the

password in the

Confirm Password

field.

On first time use, leave the password field empty and enter (and confirm)

your new password.

9. Click OK to save your settings.

The dialog closes and the operator is shown in the display area.

5.17 Creating Elevator Control

Normally, a reader is associated with a door. For elevator control, a selected

reader should be associated with outputs groups, with each output group

representing a floor.

To create elevator control:

1. Select a reader (see Section 5.6) in the display area and click the icon.

2. In the

Reader Properties

window, clear the Activation checkbox.

3. Click OK.

4. Create output groups (see Section 5.10.3).

Each output group represents a floor or several floors.

When creating an output group for the elevator control, the selection only

applies to outputs from the same panel.

5. In the General tab of the User window, associate a user with the relevant

output groups (see Section 5.12.2.1).

Each user can be associated with the relevant output groups to allow user

access to specific floors, as needed.

6. Create a panel link (see Section 5.9). Only one panel link is required.

5.18 Creating Status Maps

The Status Map displays the status of every door, input, and output,

antipassback rules, and alarms in the facility on user-selected floor plans.

To set up a Status Map:

1. In the Tree View, select Status Map and click the icon.

The

Add Status Map

window opens.

1 2 ... 74 75 76 77 78 79 80 81 82 83 84 ... 138 139

Sin comentarios

Rosslare AC-215 Guía de usuario Pagina 79