Rosslare AC-215 Manual de instalación descargar pdf (Pagina 27)

AC-215IP Hardware Settings

AC-215IP Hardware Installation Manual 27

5. AC-215IP Hardware Settings

Each AC-215IP panel controls an entrance. The behavior of the panel is

controlled by DIP switch settings.

Select the appropriate DIP switch setting to operate the panel as either a single

door, a double door, or four doors (see Section 5.3).

Access control panels configured as either single door or double door

controllers have two readers, IN or OUT.

Table 2 summarizes the possible hardware settings.

Table 2: Possible Hardware Settings

Single Door:

Outputs

Door Lock output (OUT 1)

General purpose output (OUT 1A)

General purpose output (OUT 2)

General purpose output (OUT 2A)

Inputs

Request to exit (IN 1)

Door monitor input (IN 1A)

General purpose input (IN 2)

General purpose input (IN 2A)

Readers

Reader1 Door Entry or Exit

Reader2 Door Exit or Entry

Double door:

Outputs

Door1 Lock output (OUT 1)

General purpose output (OUT 1A)

Door2 Lock output (OUT 2)

General purpose output (OUT 2A)

Inputs

Door1 Request to exit (IN 1)

Door1 monitor input (IN 1A)

Door2 Request to exit (IN 2)

Door2 monitor input (IN 2A)

Readers

Reader1 (Door1 IN/OUT)

Reader2 (Door2 IN/OUT)

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 37 38

Sin comentarios

Rosslare AC-215 Manual de instalación Pagina 27