Rosslare AC-215 Manual de usuario descargar pdf (Pagina 17)

Fel! Formatmallen är inte definierad.

AS-215 PC management software

Page 15

Step 1 - Defining a Network

This step connects the hardware to the PC.

To add a network:

1. In the Tree pane right-click on Networks and click the 'New' button to

open a new Network dialog box.

This dialog box is dynamic and has the following fields:

Field Sub-field

Description

Network name

This selection must match the dipswitch definitions.

There are four options:

Inactive

If this option is selected the network is inactive and only the

Description and this field are available

Serial

This option is the default. It opens the Serial Network fields:

COM Port – where up to eight ports can be defined

Speed – which can be 9600, 19200, 38400 or 57600

TCP/IP

This option opens the TCP/IP network fields:

Type – choose between Remote (WAN) and Local (LAN). If LAN

was selected press Configuration

, if WAN was selected set the IP

address, Port number and serial speed.

IP Address – of the Host LAN Module (view only).

Port Number – of the Host LAN Module (view only).

Speed – set the serial baud rate to 9600, 19200, 38400 or 57600

Configuration – Defines and transfers the network and serial

parameters to the Host LAN Module using Rosslare’s MD-N32.

Network type

Modem

This option opens the following fields:

COM Port – where up to eight ports can be defined

Speed – which can be 9600, 19200, 38400 or 57600

Configuration – Defines the phone Number (where the ACU is

located), password, dialing schedule and initialization

conditions to the Host Modem.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 58 59

Sin comentarios

Rosslare AC-215 Manual de usuario Pagina 17