Rosslare AC-215 Manual de usuario Pagina 26

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 59
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 25
Fel! Formatmallen är inte definierad.
AS-215 PC management software
Page 24
Function(Input 1
and Input 2 for
Double Door only)
Door Monitor only
Type (active for
supervised only)
Select between:
Normally Close
Normally close (with) 1 resistor
Normally close (with) 2 resistors
Door Monitor Input - Alarms Tab
When you first connect the software and activate a panel, VeriTrax checks if
the connection is supervised or not. If the connection is supervised, you see
two buttons,
Test
and
OK
. It is recommended to use the
OK
button which
performs a test and moves on to the next stage.
If the detected connection is not supervised, under Type, you can select
between supervised and normal.
Door Monitor Input Alarms Tab has the following fields:
Field Sub-field Description
Door held
open alert
Time for door to be opened before an alarm alert condition starts
Door held
open
Time for door to be opened before an alarm condition starts
Door forced
open
Time for door to be forced open before an alarm condition starts
Timers
Siren
This field defines that a siren type alarm is sounded in the following
options: Door held open and Door forced open
Chime
Chime(Input
1A opened)
This field defines that a chime type alarm is sounded in the following
Input 1A opened (Door monitor)
Note: In the Double Door Controller Chime Door 2 tab this field has the
following option: Input 2A opened
Door held
open alert
This field defines that a chime type alarm is sounded in the following
Door held open alert.
Vista de pagina 25
1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 58 59

Comentarios a estos manuales

Sin comentarios