Rosslare AC-225? AC-225IP? AC-225U Guía de usuario descargar pdf (Pagina 24)

Input and Output Requirements

Door Monitor Input

The Door Monitor Input typically connects to a Normally Closed

door sensing micro-switch for door status monitoring. The

following should be defined:

Single door controller: Door 1 - IN1A

Double door controller: Door 1 - IN 1A

Door 2 - IN 2A

The panel can generate two warning conditions:

• Forced alarm: When the door is forcibly opened by

unauthorized persons

• Door held open alarm: When the door is open for a period

exceeding the lock strike programmed open time

Note:

Warning conditions are governed by the software set-up.

See the "VeriTrax Access Control System User Guide" for

more details.

After the access control panel enables access, the lock is

activated according to its programmed time until one of the

following occurs:

• The access control panel stops lock activation

immediately after the door opens

• The access control panel waits for the door to close (this

can help to reduce tailgating)

Note:

Lock activation is governed by the software set-up. See

the "VeriTrax Access Control System User Guide" for more

details.

When the door open time period is over, the access control

panel ends lock activation.

AC-225 Hardware Installation and User Guide Page 23

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 44 45

Sin comentarios

Rosslare AC-225? AC-225IP? AC-225U Guía de usuario Pagina 24